Cut to Length Line

Specifications Cut to Length Line includes in Hydraulic coil car,Hydraulic conical uncoiler,Hydraulic guiding-head,Hydraulic feeding machine...

Product Name:Cut to Length Line Cut to Length Line Technical Parameter
1.Thickness of coiled plate:     0.66mm;.
2.Width of coiled plate:         1300mm;
3.Coil I.D:                      508mm760mm;
4.Coil O.D:                      ≤2200mm;
5.Weight of coiled plate:        15T;
6.Apply for the cold plate of    δb≤350Mpa;
7.Precision of leveling:         length tolerance: ±1.0mm/2000mm;
                                         diagonal tolerance: ±1.5mm/2000mm;
                                         no macroscopic pincher and small marginal wave
8.Material of leveling roller:   40Cr
  hardness of leveling roller surface: HRC4852;
9.Leveling speed:                025m/min (adjustable);
  calculated by 2m plate:        67 pcs/min
10.Power:                        440V, three phase, 60Hz. Cut to Length Line Composed Device 
1.Hydraulic coil car:    loading capacity of 15T
The operation and lifting of this dolly is conducted by oil cylinder.
2.Hydraulic conical uncoiler:
This is composed of bottom-stand(guiding track pattern), frame, detent device, discharging axe, conical discharging plate, hydraulic pushing device, clutch, etc.
3.Hydraulic guiding-head, shovel-head device:
This is composed of frame-stand, hydraulic arm, pressing & guiding roller, hydraulic leveling-head, shovel-head, etc. accompany of seam needle decelerating motor:7.5KW, etc.
4.Hydraulic feeding machine:
This is composed of frame, torii, squareness slide supporting stand, feeding roller, hydraulic lifting device, clutch, accompany of decelerator400, motor:11KW, etc.
5.Rolling orbit worktable   4m
This is composed of bottom-stand, rolling orbit, bearing-stand, etc.
6.Guiding machine:
This is composed of frame, guiding pole, adjustable screw, moveable plane plate and clutch with multiroller, etc.
7.Leveler:
Power part:  This is composed of power-stand, 650decelerator, direct-current speed adjustable motor:55KW(Eurotherm), direct-current cabinet, distributing case,  universal joint, etc.
Host machine: This is composed of leveling-stand, frame, slide, axe roller 15pcs(roller diameter: Φ140mm), electronic lifting &pressing device, accompany of two motors: 3KW.         
8.Coding device:
This is composed of coding transition table, coding & pinch device, coder, etc.
9.Cut to Length Machine: (electric control)6.3×2000mm
10.Worktable, swaying pneumatic pinch machine:
This is composed of worktable, frame, rolling orbit, bearing-stand, etc. accompany of seam needle decelerating motor:4KW
11.Unloading car:      6mm
Vertically and horizontally pneumatic pushing device, etc.
12.Full set of electric control system:
This is composed of host electric operating desk, front operating table, etc. 
13.Hydraulic system:
This is composed of hydraulic station, pipe, tie-in, etc.Hydraulic oil, lubricate oil, pneumatic resource shall provided by the User.  

Contact us if you need more details on Cut to Length Line. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Slitting and Cut to Length Line、Cutting Line. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Slitting & Cutting Machine